Gateway » ID Series » ID49C

Gateway » ID Series » ID49C LCD Screen Replacement Guide

How to Remove Replace Install your Gateway ID Series ID49C Laptop LCD Screen

1. Remove the rubber covers from you Gateway ID49C LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway ID49C Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway ID49C LCD hinges with care as they are delicate.

6. Place the Gateway ID49C LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway ID49C Inverter from the LCD.

8. You are now ready to replace and install your new Gateway ID49C LCD Screen.

9. Recconnect back your Gateway ID49C Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.